Print Version

AccuLobe™ Multi-lobe Pump
Low Flow Transfer and Metering Pump

Materials of Construction
  • 316L Stainless Steel
Design Features

The AccuLobe series lobe pump shown below is a legacy Viking Pump products now only available through Wright Flow Technologies - a sister business unit within IDEX Corporation.

This notice will remain until November 30, 2009 at which time, the product information will be removed.

The information and specs on Viking Pump's website are not being maintained, and should be considered strictly as a reference.  For current product information or specifications please contact:  

Sales & Application Department 
Telephone:  (262)-679-8000

The AccuLobe™ is designed for low volume applications in chemical, personal care products manufacturing, food and beverage, and industrial applications where minimal shear is critical, like water treatment polymers.  It features multi-lobe rotors for minimal pulsation and noise, self-draining casing, and one-piece pump and gear case for longer bearing and seal life.

A tri-wing rotor option, with reduced clearances and using non-galling alloy rotors, allows for improved volumetric efficiency on very low viscosity liquids.

Sealing options include single mechanical seal with or without quench.  Mounting options include bulkhead mount, foot mount or motor mount (with integral 3:1 speed reduction).  Standard ports are clamp connections, with weld neck optional.

Pump is designed to be easily strip cleaned or clean in place (CIP).
Performance
Capacity 0 - 35 LPM 0 - 9.2 GPM
Pressure 0 - 12 BAR 0 - 175 PSI
Viscosity 1 - 16,500 cSt 31 - 75,000 SSU
Temperature -40 - 150 C -40 - 300 F
Specifications

Size

Standard Port

Nominal Capacity at Maximum Speed

Maximum Speed

Maximum Pressure*

Inches

LPM

GPM

RPM

BAR

PSI

AL05

0.75" Clamp

35

9.2

1750

12

175

* Max. Differential Pressure

Literature

Model

Drawing*

Service Manual

Brochure

Catalog

AL05

Inch

English

English

English

*These drawings reflect standard construction pumps only.  For special construction drawings, please contact us.

 Latest News

Crown Point Productions announces that Viking Pump will be part of its "World's Greatest!..." series  Read...

The SG Series External Gear Pumps are designed to ensure reliability in industrial applications through an extensive range of sizes and options with pressure capabilities up to 172 Bar (2500 PSI).  Read...

Universal Mag Drive series can reduce maintenance and
environmental costs by eliminating the pump shaft seal saving you more than 50% of the total pump, parts and downtime cost in one year.  Read...